Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the heating resistor in the Citroen C3?

Model: Citroen C3 SC - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Checks and maintenance

See other generations:
Video tutorial

In this tutorial we can see how to replace the heating resistor in the Citroen C3, a extremely simple and quick operation. First of all, make sure that the key is not inserted, then unhook the cover located below the steering wheel and, by removing the various plastic rivets, also remove the lower panel.

Then unscrew the indicated screw using a Torx T20 key, remove the side panel of the tunnel, locate the resistor and remove it from the housing by rotating it counterclockwise. At this point, all that remains is to disconnect the connector and install the replacement following the reverse procedure.


Posted on 14 January 2025 by ScegliAuto


Related tutorials

How to Replace the Heating Resistor on a Citroen C3
How to Replace the Heating Resistor on a Citroen C3
Citroen C3 (2009-2016 / SC) To replace the heating resistor on a Citroen C3, remove the plastic cover under the steering wheel by pulling it to release the plastic clips. Once t…
How to replace the cabin filter in the Citroen C3?
How to replace the cabin filter in the Citroen C3?
Citroen C3 (2009-2016 / SC) In this tutorial, we can see how to replace the cabin filter in the Citroen C3, an extremely simple and quick operation. First of all, make sure that…
How do you replace the battery of the Citroën C3?
How do you replace the battery of the Citroën C3?
Citroen C3 (2009-2016 / SC) In order to replace the battery of the Citroën C3, you will need to open the hood so that you can access the components located inside the engine com…

Other guides you may be interested in

    Frequently Asked Questions

    • C3 2002-2009 - Where is the horn located in the Citroen C3? Read answer
    • C3 2009-2016 - What to do in case of malfunction of the external temperature sensor in the Citroen C3? Read answer
    • C3 2009-2016 - How many reversing lights does the Citroen C3 have? Read answer

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos