Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the cabin filter in the Citroen C3?

Model: Citroen C3 SC - Years 2009-2016
Part: Air filter

In this tutorial, we can see how to replace the cabin filter in the Citroen C3, an extremely simple and quick operation. First of all, make sure that the engine is cool enough, then open the hood and remove the engine cover. Next, unscrew the three screws indicated using a Torx T20 key, grab the cover of the box and remove it. At this point, all that remains is to remove the old filter, clean any dirt residue inside the housing, insert the replacement, and reassemble everything following the reverse procedure.

Posted on 1 October 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the cabin air filter of the Citroen C3
How to replace the cabin air filter of the Citroen C3
Citroen C3 (2002-2009 / FC, FN) The cabin air filter of the first series Citroen C3 is located inside the front hood, specifically behind a small door located above the seal between…
How to replace the cabin filter of the Citroen C3
How to replace the cabin filter of the Citroen C3
Citroen C3 (2009-2016 / SC) Replacing the cabin air filter of the Citroen C3 is a really simple and quick operation to do independently. To replace the filter, we would need a f…
How to replace the cabin air filter of the Citroen C3 2023
How to replace the cabin air filter of the Citroen C3 2023
Citroen C3 (2016-2023 / SY, SX) When the cabin air filter of your Citroen C3 (year 2023) is too worn out, you must proceed with its replacement as soon as possible. Luckily, it is a…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos