Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the oil filter on the Citroen C3

Model: Citroen C3 SC - Years 2009-2016
Part: Oil filter

In today's article, we will see how to replace the oil filter of the Citroen C3 2nd Series. First, you need to disconnect the air duct and rotate the tube upwards, then using a 27 socket wrench with extension, unscrew the filter fixing bolt, at this point remove the filter and rotate it upwards while removing it to avoid spilling oil on the floor. Now install the new filter, reinsert the fixing bolt and then tighten it, now reconnect the air duct. At this point the procedure will be complete and the oil filter will have been replaced correctly.

Posted on 2 February 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Change Oil and Filter on Citroen C3
How to Change Oil and Filter on Citroen C3
Citroen C3 (2009-2016 / SC) Learn how to service your Citroen C3, including the oil change. Follow these steps. Lift the car using a jack and unscrew the bolt from the oil sump …
How to replace the oil filter of the Citroen C3 petrol model
How to replace the oil filter of the Citroen C3 petrol model
Citroen C3 (2016-2023 / SY, SX) In this video, we see a particularly practical method for replacing the oil filter of the Citroen C3 gasoline. We know that the oil filter loses part…
How to Change the Oil and Filter on a Citroen C3
How to Change the Oil and Filter on a Citroen C3
Citroen C3 (2016-2023 / SY, SX) The video provided contains detailed instructions for replacing the engine oil and its corresponding filter in Citroen C3 vehicles. This guide is als…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos