Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the tire pressure warning light on the Citroën Berlingo?

Model: Citroen Berlingo MK 3 - Years 2018-2026
Part:

The tire pressure sensor of the Citroën Berlingo can be turned off by inflating the tires to the optimal pressure value: this value will be indicated on the sticker that is attached to the driver's side door pillar. Once the inflation is done, you can navigate to the menu that will appear on the screen in the center of the dashboard: you will need to select the options "Vehicle", "Safety", and "Tyre Pressure Setup" in that order. Once these options are selected in this order, you can select "RESET" on the confirmation message that appears to turn off the warning light.

Posted on 31 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tyre pressure warning light on the Citroën Berlingo?
How to reset the tyre pressure warning light on the Citroën Berlingo?
Citroen Berlingo (2008-2018 / MK 2) To reset the tyre pressure warning light on the Citroën Berlingo, turn on the ignition and use the menu that will appear on the display in the centre…
How to reset the tyre pressure warning light on the Citroën Berlingo?
How to reset the tyre pressure warning light on the Citroën Berlingo?
Citroen Berlingo (2018-2026 / MK 3) To reset the tyre pressure warning light on the Citroën Berlingo, turn the key in the ignition switch to power on the instrument cluster. Next, acces…
How do you reset the tire pressure light on the Citroën Berlingo?
How do you reset the tire pressure light on the Citroën Berlingo?
Citroen Berlingo (2018-2026 / MK 3) From the instrument panel of the Citroën Berlingo, it will be possible to make the tire pressure warning light disappear by turning the key inside th…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos