Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. C3
    4. : How to remove the diesel filter present on Citroen C3

Citroen C3 - Video tutorial

Model: Citroen C3 FN, FC - Years 2002-2009
Part: Diesel filter
Operation: How to remove the diesel filter present on Citroen C3

Let's see how to remove the diesel filter present on Citroen C3: open the front hood and lift it, then, remove the engine soundproofing panel and remove the ventilation kit with attached pipe (socket wrench). We identify the diesel filter as in the video, unhook the filter from its housing and disconnect the various circulation pipes. Once the fuel filter has been removed, remove it from the car (replace it with a new filter). Finally, we reassemble the filter in the specific housing (we connect pipes and cables) and mount the filter kit and the soundproofing panel. We close the front hood after maintenance.


Posted on 24 October 2023 by ScegliAuto

    Frequently Asked Questions

    • C3 2002-2009 - Where is the fuel filter on Citroen C3? Read Answer
    • C3 2009-2016 - Where is the Citroen C3 1.4 1.6 HDI diesel filter located? Read Answer
    • C3 2002-2009 - Where is the diesel filter of a Citroen C3 located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos