Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the front bulbs of the Citroen Berlingo MK2

Model: Citroen Berlingo MK 2 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Headlight

See other generations:
Video tutorial

How do you change the front headlight bulbs of the Citroen Berlingo? We see it in this video: we open the front hood, and we see that to access the headlights we have enough space to fit our hands and remove the rubber cap that covers the back of the headlight.

Here we find the electrical connector for the lamp power supply, which we must pull towards us, then we release the safety spring of the bulb and pull the non-functioning bulb towards us. We put the new H4 lamp in its place, and remember not to touch it with bare hands: this would greatly shorten its life.

We close the spring, reattach the electrical connector and put the rubber cap back in place. We also close the hood: the job is done.


Posted on 12 May 2025 by ScegliAuto


Related tutorials

Replacing Front Headlight Bulbs on Citroen Berlingo
Replacing Front Headlight Bulbs on Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) Replace the blown bulbs in the front lights of your Citroen Berlingo. Start by opening the front bonnet and removing the plastic cover (if fitted beh…
How to Change the Headlight Bulbs on the Citroen Berlingo 2
How to Change the Headlight Bulbs on the Citroen Berlingo 2
Citroen Berlingo (2008-2018 / MK 2) In this short video, learn how to remove and replace the headlight bulbs on the Citroen Berlingo second series, following the instructions below. Fir…
How to Replace the Rear Light Bulbs of the Citroen Berlingo
How to Replace the Rear Light Bulbs of the Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) In this brief and simple guide, follow the necessary steps to disassemble and replace the bulbs of the rear light of the Citroen Berlingo. First, ope…

Other guides you may be interested in

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos