Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Number Plate Light on Citroen Berlingo

Model: Citroen Berlingo MK 1 - Years 1996-2013
Part: License plate light

Follow this guide to replace the damaged bulb of the number plate light on a Citroen Berlingo. Use a screwdriver or plastic lever to remove the number plate light located in the rear bumper of the car. Once the transparent plastic cover is removed, extract the bulb by hand. Install the new/LED bulb (same size and voltage), inserting it into the bulb holder, then reattach the plastic cover by pressing it into place until it clicks. Finally, test the functionality of the previously installed bulb.

Updated on 4 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Number Plate Light on Citroen Berlingo
Replacing Number Plate Light on Citroen Berlingo
Citroen Berlingo (1996-2013 / MK 1) Are the number plate bulbs on your Citroen Berlingo damaged? Here's how to replace them. Using a screwdriver, remove the transparent light unit for t…
How to remove the number plate bulb on the Citroen Berlingo MK1
How to remove the number plate bulb on the Citroen Berlingo MK1
Citroen Berlingo (1996-2013 / MK 1) Today, we will see the main steps to remove and replace the number plate bulb on the first series Citroen Berlingo from 2004. First, remove the small…
The Easiest Method to Change the Number Plate Bulbs on Citroen Berlingo
The Easiest Method to Change the Number Plate Bulbs on Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) The method described is undoubtedly the simplest and safest way to change the number plate bulbs on a Citroen Berlingo. This way, you won't need scre…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos