Do it yourself
Frequently asked questions about cars and motorcycles

How to remove the rear bumper on the Citroen Berlingo?

Model: Citroen Berlingo MK 2 - Years 2008-2018
Part: Rear bumper

In this tutorial we can see how to remove the rear bumper in the Citroen Berlingo, an extremely simple and quick operation. First, we lift the rear side of the vehicle, then we remove both wheels and the inner wheel arch covers. We then disconnect the parking sensor connectors, if present, unscrew the indicated bolts and continue by removing both headlights. At this point, all that's left is to unscrew the last fixing bolts, separate the bumper from the frame and install the replacement following the exact reverse procedure.

Posted on 5 September 2024 by ScegliAuto

Video tutorial

Related tutorials

Citroen Berlingo (1996-2013 / MK 1) Below we will see the steps that will allow us to disassemble and replace the rear bumper of the Citroen Berlingo. First, we open the rear door and s…
Citroen Berlingo (2008-2018 / MK 2) Today, with the help of this video tutorial, we will explain how to remove the front and rear bumpers of a Citroen Berlingo model B9. To remove the b…
Citroen Berlingo (2018-2026 / MK 3) In this tutorial we can see how to remove the rear bumper in the Citroen Berlingo, an extremely simple and quick operation. First, we open the trunk …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos