Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front and Rear Bumpers of the Citroen Berlingo

Model: Citroen Berlingo MK 2 - Years 2008-2018
Part: Front bumper

Today, with the help of this video tutorial, we will explain how to remove the front and rear bumpers of a Citroen Berlingo model B9. To remove the bumpers, it is necessary to lift the car on axle stands to make the job easier. Start by removing both front wheels and the corresponding wheel arch liners, then disconnect the connectors for the front headlight lights. Remove the three bolts securing the bumper from underneath the car, then open the bonnet to remove the three upper bolts. Finally, pull the bumper completely out of its position. Continue by removing the headlights, then start unscrewing the side bolts to remove the side body parts, which will also pull out the rear of your Berlingo.

Updated on 18 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing Front Bumper on Citroen Berlingo
Removing Front Bumper on Citroen Berlingo
Citroen Berlingo (1996-2013 / MK 1) In today's video tutorial, you will learn how to remove the front bumper from a Citroen Berlingo. First, open the bonnet from inside the car and remo…
How to Remove a Bumper on Citroen Berlingo
How to Remove a Bumper on Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) Removing the front bumper of the Citroen Berlingo? Remove the front wheels for easier access. Unscrew the securing screws located inside the wheel ar…
How to remove the rear bumper of the Citroen Berlingo
How to remove the rear bumper of the Citroen Berlingo
Citroen Berlingo (1996-2013 / MK 1) Below we will see the steps that will allow us to disassemble and replace the rear bumper of the Citroen Berlingo. First, we open the rear door and s…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos