Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the rear bumper on the Citroen Berlingo?

Model: Citroen Berlingo MK 3 - Years 2018-2026
Part: Rear bumper

In this tutorial we can see how to remove the rear bumper in the Citroen Berlingo, an extremely simple and quick operation. First, we open the trunk door, then we remove both headlights by unscrewing the respective fixing screws with a Torx T30 key. We then unscrew the screws on the upper edge of the bumper, continue with those accessible from inside the wheel arches, and finish with the lower ones. At this point, we can grab the bumper from one of the two ends, separate it from the frame, and install any replacement following the reverse procedure.

Posted on 29 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How to remove the rear bumper on the Citroen Berlingo?
How to remove the rear bumper on the Citroen Berlingo?
Citroen Berlingo (2008-2018 / MK 2) In this tutorial we can see how to remove the rear bumper in the Citroen Berlingo, an extremely simple and quick operation. First, we lift the rear s…
How to remove the rear bumper of the Citroen Berlingo
How to remove the rear bumper of the Citroen Berlingo
Citroen Berlingo (1996-2013 / MK 1) Below we will see the steps that will allow us to disassemble and replace the rear bumper of the Citroen Berlingo. First, we open the rear door and s…
How to Remove a Bumper on Citroen Berlingo
How to Remove a Bumper on Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) Removing the front bumper of the Citroen Berlingo? Remove the front wheels for easier access. Unscrew the securing screws located inside the wheel ar…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos