Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Service reset on a Citroen C4 Cactus

Model: Citroen Cactus MK 1 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Service warning light

Video tutorial

Thanks to this very useful video tutorial, you will be able to see the entire procedure to follow step by step to reset the service light on a Citroen C4 Cactus, model produced from 2014 to 2020. This operation should be performed after the regular oil change and related filter replacement, or after the periodic service, but let's see how to proceed immediately.

So the operation is very simple to do, first we need to press and hold the central button of the speedometer and then turn on the car's ignition without starting the engine.

Once this is done, a countdown will appear as shown in the video, so we continue to hold down the previous button until the time expires to perform the reset and complete the job.


Posted on 18 June 2025 by ScegliAuto


Related tutorials

Where is the OBD2 port of the Citroen C4 Cactus located?
Where is the OBD2 port of the Citroen C4 Cactus located?
Citroen Cactus (2014-2020 / MK 1) The OBD2 port on the Citroen Cactus car produced from 2016 to 2017 is located under the left cover on the driver's side. The port is yellow in color …
How to Reset the Service Light on a Citroen Cactus
How to Reset the Service Light on a Citroen Cactus
Citroen Cactus (2014-2020 / MK 1) Resetting the service light on the Citroen Cactus follows the same simple and quick steps used for other Citroen models. To reset the service light, …
How to Reset the Service Light on a Citroen C4 Cactus
How to Reset the Service Light on a Citroen C4 Cactus
Citroen Cactus (2014-2020 / MK 1) In this article, with the help of the video tutorial, you will see how to reset the maintenance light on a Citroen C4 Cactus. The procedure is simple…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos