Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the tire pressure warning light on the Citroën C1?

Model: Citroen C1 MK 2 - Years 2014-2022
Part:

To reset the tire pressure warning light on the Citroën C1, you need to turn on the instrument panel by inserting the ignition key into the corresponding slot: once the panel is on, you can open the glove compartment located on the front passenger side. Here you will find the SET button that will allow you to make the warning light disappear: it must be held down for a few seconds to turn off the light. If the light does not disappear, it means that the tires have not been brought to the correct pressure.

Posted on 25 June 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the tire pressure warning light on the Citroën C1?
How do you reset the tire pressure warning light on the Citroën C1?
Citroen C1 (2014-2022 / MK 2) The tire pressure warning light reset operation on the Citroën C1 is carried out by first inflating the tires, bringing them back to the correct infl…
How to Reset the Tyre Warning Light on the Citroen C1 2021
How to Reset the Tyre Warning Light on the Citroen C1 2021
Citroen C1 (2014-2022 / MK 2) In this mini guide dedicated to your Citroen C1 second series (2021), you will learn how to correctly perform the manual reset of the tyre warning li…
How do you reset the tire pressure warning light on the Citroën C1?
How do you reset the tire pressure warning light on the Citroën C1?
Citroen C1 (2014-2022 / MK 2) To completely remove the tire pressure sensor from the instrument panel of the Citroën C1, you will first need to inflate the tires, bringing them to…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos