Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to release the spare wheel of the Citroen Nemo

Model: Citroen Nemo MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Wheel

Video tutorial

In this video, we see how to remove the spare wheel from the Citroen Nemo's housing: it is located in the lower part of the vehicle's frame and must be removed using the lever that is part of the on-board equipment and is located under the trunk floor, along with the triangle, the lamps, and the jack for lifting the car. The lever must be inserted into the hole located in the center of the rear hatch.

By turning the lever, we can lower the wheel, which is attached to a steel cable and a special screw that holds the tire to the body.

Let's detach it and make good use of it.


Posted on 13 July 2025 by ScegliAuto


Related tutorials

How to remove the spare wheel from the Citroen Nemo
How to remove the spare wheel from the Citroen Nemo
Citroen Nemo (2007-2017 / MK 1) Here are the instructions to remove and replace the spare wheel on the Citroen Nemo. First, open the rear doors of the vehicle and gather the necessa…
How to Remove Spare Wheel on Citroen Nemo
How to Remove Spare Wheel on Citroen Nemo
Citroen Nemo (2007-2017 / MK 1) This tutorial is about the Citroen Nemo, but it can actually serve as an example for many van-type vehicles. If possible, lift the vehicle with a jac…
Where to Find the Fuse Box on the Citroen Nemo
Where to Find the Fuse Box on the Citroen Nemo
Citroen Nemo (2007-2017 / MK 1) If you own a Citroen Nemo and want to find out where the fuse box containing all the various fuses is located, follow the procedure described below. …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos