Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Citroen
  4. :
  5. Nemo
  6. : How to remove spare wheel on Citroen Nemo

Citroen Nemo - Video tutorial

Model: Citroen Nemo MK 1 - Years 2007-2017
Part: Wheel
Operation: How to remove spare wheel on Citroen Nemo

This tutorial is about the Citroen Nemo, but can actually be taken as an example for many van cars. If you can, lift the car with a jack. Without emptying your trunk, as is done in many cars, unscrew the bolt located above the rear bumper, where there is the rubber of the trunk itself. As you unscrew this bolt, the spare wheel retaining rope will loosen and the spare wheel will continue to descend until it touches the ground. Continue to unscrew until the end of the bolt. Unhook the rope by sliding off its retaining support laterally. Screw in the bolt to make the rope snap back into place.


Posted on 19 February 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos