Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to access the internal fuses of the Citroen Jumper

Model: Citroen Jumper MK 3 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Fuse box

See other generations:
Video tutorial

The following instructions will allow us to access the internal fuse box of the Citroen Jumper. First, we get on board the cabin and start by removing the plastic cover found at the bottom on the driver's side, unscrewing the two fixing screws of the cover; inside we will find the fuses, as shown in the video.

Usually, we find the fuse diagram inside the cover or near the fuse box, which can also be found in the vehicle's owner's manual; through the codes and amperages, it will be possible to identify any faulty fuses.


Posted on 15 July 2025 by ScegliAuto


Related tutorials

Where are the fuses located in the Citroën Jumper?
Where are the fuses located in the Citroën Jumper?
Citroen Jumper (2006-2014 / MK 2) The fuses in the Citroën Jumper are contained within the appropriate fuse boxes installed in the vehicle: in this type of vehicle, you can find two b…
Where are the fuses on board the Citroen Jumper 2?
Where are the fuses on board the Citroen Jumper 2?
Citroen Jumper (2006-2014 / MK 2) The fuses located on board the Citroen Jumper van model 2, which was produced between 2006 and 2014, are situated in a easily accessible position for…
Where are the Fuses on the Citroën Jumper?
Where are the Fuses on the Citroën Jumper?
Citroen Jumper (2006-2014 / MK 2) The fuse boxes of the Citroën Jumper contain the fuses that control the devices found on the vehicle: there are four in this type of vehicle. The fir…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos