Do it yourself
Frequently asked questions about cars and motorcycles

How to flush the coolant of a Citroen C4 Picasso MK1 1.6 HDi

Model: Citroen C4 Picasso MK 1 - Years 2006-2013
Part: Antifreeze coolant

In this video, we will see how to bleed the coolant on a Citroen C4 Picasso MK1 1.6 HDi: we start by lifting the vehicle at the front, holding it up with jack stands for added safety. We remove the plastic protection located under the engine. We disconnect the lower radiator hose and drain the coolant completely into a container (which will be disposed of at an authorized center). We fill the system with demineralized water through the expansion tank, start the engine, turn on the heater to the maximum, and circulate the water to clean the system. After cooling the engine, we collect the water along with the previously removed coolant. Now we fill it with the new specific coolant (which must comply with Citroen specifications) up to the MAX level. Now we locate the bleed screws: one is near the intake duct, and one is under the windshield. We open them until air bubble-free liquid comes out. Now we start the engine and accelerate with the heater on maximum, checking that the system functions correctly: turn off and top up if necessary.

Posted on 4 September 2025 by ScegliAuto

Video tutorial

Related tutorials

Citroen C4 Picasso (2006-2013 / MK 1) Today we will discover the instructions that will allow us to replace the battery of the Citroen C4 Picasso 1.6 HDI. First, let's open the car's hood…
Citroen C4 Picasso (2006-2013 / MK 1) In this video tutorial, you will learn how to dismantle and replace the gear shift cable on the Citroen C4 Picasso 1.6 HDI. First, open the bonnet of…
Citroen C4 Picasso (2006-2013 / MK 1) In this guide we will see the instructions that will allow us to disassemble and replace the battery of the Citroen C4 Picasso 1.6 HDi. First of all,…

Other guides you may be interested in

How to replace the horn on a Renault Duster - Dacia Duster

Today's main instructions will show you the procedure for removing and replacing the horn or sound signal on the Renault Duster, as well as the Dacia Duster. First, open the bonnet of the vehicle and start removing the front bumper by unscrewing all the fixing screws; you will find the horn right in front of the radiator, as shown in the video. At this point, disconnect the electrical connector and unscrew the bracket screw to remove and replace the horn with the new one; finally, reassemble the front bumper!

Watch the video!


by ScegliAuto

More videos