Do it yourself
Frequently asked questions about cars and motorcycles

How do you remove the battery from a CITROËN C3 AIRCROSS?

Model: Citroen C3 Aircross MK 1 - Years 2017-2024
Part: Battery

To remove the battery, start by turning off the car and removing the key. Open the hood and locate the battery, which is usually covered by a plastic shield: remove it carefully. Use a 10mm wrench to first loosen the negative (-) terminal and then the positive (+) terminal to avoid short circuits. If there is a mounting bracket, loosen the bolt and remove it. At this point, lift the battery with caution (it is heavy, so be careful with your back!). If you need to replace it, insert the new one following the steps in reverse. Finally, make sure everything is securely fastened and try to start the car. If you do not feel confident in performing these operations on your own, contact a trusted mechanic.

Posted on 6 September 2025 by ScegliAuto

This video is currently unavailable

Related tutorials

Citroen C3 Aircross (2017-2024 / MK 1) To replace the battery of the Citroën C3 AirCross, you will need to open the hood in order to access the components located inside the engine compart…
Citroen C3 Aircross (2017-2024 / MK 1) Before you can start, open the rear door of your Citroen C3 Aircross. Begin by pulling towards you the latch located at the lower outer corner of the…
Citroen C3 Aircross (2017-2024 / MK 1) In this video tutorial, see how to replace the key fob battery of a Citroen C3 Aircross. The operation is very simple; you just need a flat-head scre…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos