Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the bulb of the interior light of the Citroen C3 Picasso

Model: Citroen C3 Picasso MK 1 - Years 2008-2017
Part: Interior dome light bulb

Today we will learn how to disassemble the interior light fixture of the Citroen C3 Picasso, replacing its bulb. First, we climb into the interior and begin to pry on the side of the light fixture to detach and remove it; disconnect the electrical connector inside, as shown in the video. At this point, we replace the bulb with new ones, of the correct type and with the same fitting; secure and connect the interior light fixture to the ceiling, also replacing the bulb of the rear light fixture in the same way.

Posted on 16 September 2025 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Replace the Front Headlamp Bulb on a Citroen C3 Picasso
How to Replace the Front Headlamp Bulb on a Citroen C3 Picasso
Citroen C3 Picasso (2008-2017 / MK 1) Before starting, open the bonnet of your Citroen C3 Picasso. First, disconnect the connector that powers the blown bulb by pulling it out of its hous…
How to Replace the Rear Light Bulb on a Citroen C3 Picasso?
How to Replace the Rear Light Bulb on a Citroen C3 Picasso?
Citroen C3 Picasso (2008-2017 / MK 1) Before starting, open the tailgate of your Citroen C3 Picasso. Begin by unscrewing and removing the screws that secure the rear light to its housing.…
How to replace the front headlamp bulb of the Citroen C3 Picasso
How to replace the front headlamp bulb of the Citroen C3 Picasso
Citroen C3 Picasso (2008-2017 / MK 1) Replacing the front headlamp bulb of the Citroen C3 Picasso is very simple and quick. Open the bonnet and position yourself in front of the headlamp …

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos