Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the service light on the Citroën C1?

Model: Citroen C1 MK 2 - Years 2014-2022
Part: Service warning light

You can reset the Citroën C1's Service light by pressing and holding the button located at the bottom right of the instrument panel while it is turned off. By continuing to hold down the button, you can insert the ignition key into the ignition switch and turn it to start the instrument panel. Once the panel is on, you can wait a few seconds with the button pressed until the reset is complete. At the end of the procedure, you can turn off the instrument panel to finish.

Posted on 18 November 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset tyres on Citroen C1
How to reset tyres on Citroen C1
Citroen C1 (2005-2014 / MK 1) In this video, see how to reset the service on a Citroen C1. Turn on the instrument cluster with the appropriate key from the remote, check the car's…
How to Reset the Tyre Pressure Warning Light on a Citroën C1?
How to Reset the Tyre Pressure Warning Light on a Citroën C1?
Citroen C1 (2014-2022 / MK 2) To reset the tyre pressure warning light on a Citroën C1, first inflate all the tyres to the correct pressure. This value is indicated on the sticker…
How to Reset the Service Light on a Citroën C1
How to Reset the Service Light on a Citroën C1
Citroen C1 (2014-2022 / MK 2) To reset the Service light on a Citroën C1, press and hold the button located at the bottom right of the instrument panel while it is off. Insert the…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos