Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. : Pallas

How to replace the wheel with the spare one on the Citroen DS Pallas

Model: Citroen Pallas MK 1 - Years: 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966
Part: Wheel

Video tutorial

Below we will see the steps that will allow us to disassemble and replace the wheel with the spare one on the Citroen DS Pallas. First, we remove the fender of the car, in case of replacing the rear wheel, and start loosening the wheel bolts with the appropriate key; then we lift the car through the jack, removing the rear wheel, as shown in the video.

At this point we install the spare wheel, screwing the bolts in a crossed manner; then we lower the car and finally reassemble the rear fender, following the video tutorial to the end!


Posted on 19 November 2025 by ScegliAuto


Related tutorials

How to Replace the Wheel on a Citroen Pallas
How to Replace the Wheel on a Citroen Pallas
Citroen Pallas (1955-1975 / MK 1) In this short guide, we will see the instructions that will allow us to remove and replace the wheel with the spare on a Citroen Pallas. First, open …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos