Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

In the Citroen Jumper 2, how do you reset the service light?

Model: Citroen Jumper MK 2 - Years 2006-2014
Part: Service warning light

The vehicle for which we have attached a presentation video, namely the Citroen Jumper 2, obviously has its own regular maintenance program, including oil changes, filters, service belt, timing belt, and more, of course prepared by the manufacturer. When the service expiration warning light comes on, it is necessary to carry out the aforementioned interventions and, at the end of these, reset the warning as explained here: press and hold the 0.0/Set button, turn on the instrument panel, wait for the countdown to complete, which lasts about ten seconds, release the button, and turn off the instrument panel.

Posted on 23 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on the Citroen Jumper 3?
How to Reset the Service Light on the Citroen Jumper 3?
Citroen Jumper (2014-2024 / MK 3) The activation of the service light indicates that the routine maintenance carried out in the past is due again. If you decide to do it yourself, rem…
How to Reset the Service Light on the Citroën Jumper?
How to Reset the Service Light on the Citroën Jumper?
Citroen Jumper (2006-2014 / MK 2) To reset the Service light on the Citroën Jumper, turn on the instrument cluster without starting the vehicle; then, press the accelerator pedal and …
Resetting the service light on the Citroen Jumper.
Resetting the service light on the Citroen Jumper.
Citroen Jumper (2006-2014 / MK 2) The following information will show us the procedure to reset the maintenance service light for the engine oil change of the Citroen Jumper, as well …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos