Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light on the Citroën Jumper?

Model: Citroen Jumper MK 2 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Service warning light

See other generations:
Video tutorial

It will be possible to completely reset the Service light that appears on the instrument panel of the Citroën Jumper by turning on the instrument panel, turning the key inside the corresponding ignition block. Once the instrument panel is activated, you will need to press the accelerator and brake pedals simultaneously for about 15 seconds.

This will display a message on the instrument panel indicating the need to replace the oil. As soon as the message appears on the screen, you will need to turn off the instrument panel; when it is turned on again, you will see that the Service light has been reset.


Posted on 13 April 2026 by ScegliAuto


Related tutorials

Resetting the Service Light on the Citroen Jumper
Resetting the Service Light on the Citroen Jumper
Citroen Jumper (2006-2014 / MK 2) Today, we will go through the instructions to reset the service light for the routine maintenance oil change on the Citroen Jumper. First, get into t…
How to restore the service light indicator on the 2005 Citroen Jumper
How to restore the service light indicator on the 2005 Citroen Jumper
Citroen Jumper (1994-2006 / MK 1) In this article we see how to restore the service light of the Citroen Jumper, a procedure that is necessary because the control unit does not detect…
How to reset the service light on the Citroen Jumper
How to reset the service light on the Citroen Jumper
Citroen Jumper (2006-2014 / MK 2) The steps to reset the service light on a Citroen Jumper vehicle produced from 2006 to 2014 are very similar to those previously explained for Ford F…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos