Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on the Citroen Jumper

Model: Citroen Jumper MK 2 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Service warning light

See other generations:
Video tutorial

The steps to reset the service light on a Citroen Jumper vehicle produced from 2006 to 2014 are very similar to those previously explained for Ford Focus vehicles. Get into the vehicle and press on the brake and accelerator pedals while starting the instrument panel.

Keep the pedals pressed until the reset of the light is completed; this operation may take about 20 seconds. If the reset is not successful, it will be necessary to go to a workshop to have a computerized diagnosis performed through an OBD port and diagnostic computer.


Posted on 7 September 2025 by ScegliAuto


Related tutorials

Resetting the Service Light on the Citroen Jumper
Resetting the Service Light on the Citroen Jumper
Citroen Jumper (2006-2014 / MK 2) Today, we will go through the instructions to reset the service light for the routine maintenance oil change on the Citroen Jumper. First, get into t…
How to restore the service light indicator on the 2005 Citroen Jumper
How to restore the service light indicator on the 2005 Citroen Jumper
Citroen Jumper (1994-2006 / MK 1) In this article we see how to restore the service light of the Citroen Jumper, a procedure that is necessary because the control unit does not detect…
How to reset the service light on a Citroen Jumper
How to reset the service light on a Citroen Jumper
Citroen Jumper (2006-2014 / MK 2) The service light reset, related to the car service, on a Citroen Jumper vehicle follows the same procedure used for the Peugeot Boxer service light …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos