Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Service Light on the Citroen Jumper

Model: Citroen Jumper MK 2 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Service warning light

See other generations:
Video tutorial

Today, we will go through the instructions to reset the service light for the routine maintenance oil change on the Citroen Jumper. First, get into the vehicle and press and hold the accelerator pedal; then turn on the ignition and press the brake pedal five times, as shown in the video.

At this point, turn off the ignition and remove the key, waiting about ten seconds before turning the ignition and engine back on; this will successfully reset the service light!


Updated on 6 October 2026 by ScegliAuto


Related tutorials

How can I reset the service light on my Citroen Jumper?
How can I reset the service light on my Citroen Jumper?
Citroen Jumper (2006-2014 / MK 2) Resetting the service warning on your Citroen Jumper is a very simple operation. This should only be done after performing the service. First, turn o…
How to reset the service light on the Citroen Jumper 2.2 HDI
How to reset the service light on the Citroen Jumper 2.2 HDI
Citroen Jumper (2006-2014 / MK 2) These short and simple steps will illustrate the process of resetting the service light for the regular maintenance of the engine oil change of the C…
How to Reset the Service Light on the Citroen Jumper?
How to Reset the Service Light on the Citroen Jumper?
Citroen Jumper (2014-2024 / MK 3) .. Resetting the service light on the Citroen Jumper is easy and can be done in just a few minutes without.. …

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos