Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How can I reset the service light on my Citroen Jumper?

Model: Citroen Jumper MK 2 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Service warning light

See other generations:
Video tutorial

Resetting the service warning on your Citroen Jumper is a very simple operation. This should only be done after performing the service.

First, turn off the ignition and hold down the accelerator and brake pedals. Now turn the key and switch on the ignition.

You will see a ten-second countdown appear on the display. At this point, you can turn off and then turn on the ignition again to confirm that the procedure has been completed correctly.

The light will come back on when it is time for the next service.


Updated on 6 June 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Citroen Jumper
How to Reset the Service Light on a Citroen Jumper
Citroen Jumper (2014-2024 / MK 3) To reset the service light on the Citroen Jumper, get in the vehicle and turn on the ignition without starting the engine. Use the controls on the st…
How to reset the service light on the Citroën Jumper?
How to reset the service light on the Citroën Jumper?
Citroen Jumper (2006-2014 / MK 2) To reset the service light on the Citroën Jumper, turn on the ignition by rotating the key in the ignition switch. Once the ignition is on, press bot…
In the Citroen Jumper 2, how do you reset the service light?
In the Citroen Jumper 2, how do you reset the service light?
Citroen Jumper (2006-2014 / MK 2) The vehicle for which we have attached a presentation video, namely the Citroen Jumper 2, obviously has its own regular maintenance program, includin…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos