Do it yourself
Frequently asked questions about cars and motorcycles

How to change the air filter of the Citroen C3

Model: Citroen C3 FC, FN - Years 2002-2009
Part: Air filter

To replace the engine air filter on the Citroen C3, work with the engine off and cold, with the car on a level surface. Open the hood and locate the air filter box, connected to the intake duct via a sleeve or plastic tube with a clamp/connector. To access the filter, first clear the workspace by disconnecting the intake duct from the filter box, without pulling on nearby wiring or hoses. Once the connection is free, manipulate the latches on the filter box cover and lift it just enough to expose the filter element. Carefully remove the old filter, avoiding dropping dirt into the housing, and check that the seating is clean all around the perimeter. Insert the new filter while respecting the orientation and ensuring that the frame sits correctly in place, to avoid unfiltered air leaks. Close the cover by repositioning all the latches, then reconnect the intake duct and tighten/secure the connection firmly. Finish with a visual check: cover properly closed, duct well connected, and no parts under tension; if you hear unusual intake noises after starting, immediately recheck the tightness of the connection.

Posted on 15 January 2026 by ScegliAuto

Video tutorial

Related tutorials

Citroen C3 (2009-2016 / SC) Learn how to remove the air filter on a Citroen C3. Open the car door, pull up the engine compartment release lever located at the bottom left of the…
Citroen C3 (2002-2009 / FC, FN) Do you want to replace the cabin air filter on the Citroen C3? Here’s how to remove the filter from the engine bay. Lift the front bonnet of the car,…
Citroen C3 (2016-2023 / SY, SX) The steps to replace the air filter of the Citroen C3 are: - open the front hood of the car; - unscrew the screws on the filter cover; - disconnect t…

Other guides you may be interested in

How to Open the Bonnet on the Lancia Y

To open the bonnet on this vehicle, follow these simple instructions: first, open the driver's door and locate the lever positioned just below the dashboard, marked with an image of the vehicle with the bonnet open. Pull this lever towards you until you hear a "click" indicating the bonnet is released. Next, exit the cabin and stand in front of the bonnet to disengage the safety catch and complete the opening. To do this, slightly lift the bonnet, locate the yellow lever underneath, and pull it to the left to fully release and open the bonnet.

Watch the video!


by ScegliAuto

More videos