Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Bulbs in the Rear Light of a Citroen C3

Model: Citroen C3 FC, FN - Years 2002-2009
Part: Tail light bulb

How to replace the bulbs in the rear light of a Citroen C3? This is a very simple operation, let’s see how to proceed: open the boot lid, then remove the fabric cap located on the side trim of the boot; unscrew the securing nuts of the rear light (if present), disconnect the power connectors attached to the light and pull it out of its housing (unscrew the securing screws at the side of the light). Replace the damaged bulbs with new ones (same voltage) at hand. Refit the light with the respective securing nuts, replace the inspection cap, and finally test the correct operation of the lights.

Updated on 9 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Light of a Citroën C3
How to Replace the Rear Light of a Citroën C3
Citroen C3 (2009-2016 / SC) Follow this guide to replace the rear light of a Citroën C3 along with the bulbs. Open the boot lid, unscrew the securing nuts at the back of the rea…
How to replace the rear headlight bulbs of the Citroen C3
How to replace the rear headlight bulbs of the Citroen C3
Citroen C3 (2009-2016 / SC) Below we will see the instructions for disassembling the rear light and replacing its bulbs on the Citroen C3. First, open the rear hatch of the trun…
Replacing the Bulbs in the Rear Light of a Citroen C3
Replacing the Bulbs in the Rear Light of a Citroen C3
Citroen C3 (2016-2023 / SY, SX) In this guide, you will find instructions to remove and replace the bulbs in the rear light of a Citroen C3. First, open the boot lid and start remov…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos