Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Bulbs on the Citroen C3?

Model: Citroen C3 SC - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Tail light bulb

See other generations:
Video tutorial

In this tutorial, you will see how to replace the rear light bulbs on the Citroen C3, a very simple and quick operation. First, ensure the key is not in the ignition for safety.

Then, open the boot and remove the panel located at the back of the light in question. Next, unscrew the internal plastic nut, disconnect the power connector, and pull the light out of the bodywork towards you. At this point, you can open the lamp and proceed with replacing the faulty bulb, avoiding direct contact with the replacement using bare hands.


Updated on 3 August 2026 by ScegliAuto


Related tutorials

Replacing the Bulbs in the Rear Light of a Citroen C3
Replacing the Bulbs in the Rear Light of a Citroen C3
Citroen C3 (2016-2023 / SY, SX) In this guide, you will find instructions to remove and replace the bulbs in the rear light of a Citroen C3. First, open the boot lid and start remov…
How to Replace the Rear Light Bulbs on the Citroen C3
How to Replace the Rear Light Bulbs on the Citroen C3
Citroen C3 (2009-2016 / SC) Below are the instructions for removing the rear light and replacing its bulbs on the Citroen C3. First, open the boot lid and start removing the cov…
How to Replace the Rear Light of a Citroën C3
How to Replace the Rear Light of a Citroën C3
Citroen C3 (2009-2016 / SC) Follow this guide to replace the rear light of a Citroën C3 along with the bulbs. Open the boot lid, unscrew the securing nuts at the back of the rea…

Other guides you may be interested in

How to lower the rear seats in the Peugeot 206?

In this tutorial, you will see how to lower the rear seats in the Peugeot 206, a very simple and quick operation, for example, if you need more space in the boot. First, open both the doors and the tailgate, then unclip the seat base and position it vertically. Next, remove the horizontal partition, locate the release levers at the ends of both seatbacks, and, by operating them, lower the seatbacks. To reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos