|
Do it yourself
| |||
| ||||
Replacing the Diesel Filter on a Citroën C4 II HDi
Model: Citroen C4
MK 2
- Years 2010-2018
The second generation Citroën C4 has a cartridge diesel filter, not a metal canister. The procedure is similar on almost all PSA diesel engines. Locate the filter under the bonnet, on the left side, near the battery, mounted on a bracket. Disconnect the negative terminal of the battery for safety, clean the area around the filter with a cloth to prevent dirt from entering the system, and disconnect the fuel lines, one in and one out. Unclip the filter from the bracket and remove the old filter, which will be disposed of properly. Prepare the new filter, which can be found on Amazon with the code B0893191QX at a price of £16.24, with free delivery for Prime customers. Lubricate the new O-ring with clean diesel; if the filter has a moisture sensor, transfer it from the old filter, prepare a catch basin, and fill the new filter with clean diesel. Position the filter in the bracket, reconnect the fuel lines and the electrical connector, reconnect the battery, and turn the ignition 2-3 times without starting the engine, then attempt to start.
Posted on 7 June 2026 by ScegliAuto
Video tutorial
Related tutorials
Citroen C4
(2010-2018 /
MK 2)
Follow this guide for step-by-step instructions to remove and replace the diesel filter on the Citroen C4 1.6 HDI. First, open the bonnet of your car…
Citroen C4
(2004-2010 /
MK 1)
Today's instructions will show you how to remove and replace the diesel filter on a Citroen C4 2.0 HDI in simple steps. First, open the bonnet of the…
Citroen C4
(2010-2018 /
MK 2)
Today's instructions will show you how to remove and replace the diesel filter on the Citroen C4 1.6 HDI, in simple steps. First, open the vehicle's …
Other guides you may be interested in
|
How to Check the Oil Level on a Jeep Renegade?
To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 2.928
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |