Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Light on the 2020 Citroen C3?

Model: Citroen C3 SY, SX - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Warning light – error code

See other generations:
Video tutorial

Today, you will learn how to perform the reset procedure for the service light related to the car service on a 2020 Citroen C3. To reset the light, turn on the instrument panel without starting the engine. Press the brake pedal and simultaneously press the button with the spanner symbol located below the display.

Hold the button for about 5 seconds. The service light indicated by the spanner symbol will start to flash on the display; when the light stops flashing, release the button and restart the instrument panel while also releasing the brake pedal.

If the reset fails, check the oil level sensors.


Posted on 16 July 2026 by ScegliAuto


Related tutorials

Citroen C3 (2002-2009 / FC, FN) Resetting the service light related to the service interval on a Citroen C3 vehicle follows very simple and quick steps that can be done independentl…
Citroen C3 (2009-2016 / SC) Manually resetting the service light on your 2010 Citroen C3 is very straightforward; just follow the steps in the following guide to complete the op…
Citroen C3 (2016-2023 / SY, SX) In this video tutorial, you will learn how to reset the service light for routine maintenance on a Citroen C3. Enter the car and press the button on …

    Frequently Asked Questions

    • C3 2016-2023 - What does the MAX warning light on Citroen C3 indicate? Read answer
    • C3 2016-2023 - How to reset the car radio of the Citroen C3? Read answer
    • C3 2009-2016 - What does the SERV warning light indicate in the Citroen C3? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos