Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Fan Resistor on a Citroen C3

Model: Citroen C3 FC, FN - Years 2002-2009
Part: Blower motor

How to remove the fan resistor on a Citroen C3. In this video, see how to perform the disassembly. Use a lever to remove the plastic under the dashboard (remove the securing screws of the cover on the driver's side), then unscrew the cover (where the resistor is located) with a screwdriver. Disconnect the large connector of the resistor, then extract it from the cabin. Insert a new fan resistor (connect the power connector). Finally, refit the resistor cover and tighten the screws. Check the correct assembly of the previously fitted parts and test their proper functioning.

Updated on 12 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Citroen C3 (2002-2009 / FC, FN) This short video shows you how to remove and replace the air conditioning fan resistor in a Citroen C3 (the procedure is similar for many other makes…
Citroen C3 (2002-2009 / FC, FN) To replace the cooling fan resistor on a Citroen C3, first disconnect the negative terminal of the battery, then locate the resistor module connected…
Citroen C3 (2009-2016 / SC) How to remove the damaged fan resistor on a Citroen C3? Follow these steps for disassembly. Remove the glove compartment from the dashboard using a l…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos