Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Damaged Fan Resistor on a Citroen C3

Model: Citroen C3 SC - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Blower motor

See other generations:
Video tutorial

How to remove the damaged fan resistor on a Citroen C3? Follow these steps for disassembly. Remove the glove compartment from the dashboard using a lever; unscrew the securing screws on the side with a screwdriver.

Remove the plastic cover in the glove compartment; disconnect the large connector of the resistor, then extract it from the cabin. Insert a new fan resistor (connect the power connector).

Finally, reassemble the glove compartment and tighten the screws. Check the correct assembly of the parts and test their proper functioning.


Updated on 12 March 2026 by ScegliAuto


Related tutorials

How to Remove the Fan Resistor on a Citroen C3
How to Remove the Fan Resistor on a Citroen C3
Citroen C3 (2002-2009 / FC, FN) How to remove the fan resistor on a Citroen C3. In this video, see how to perform the disassembly. Use a lever to remove the plastic under the dashbo…
How to Remove and Replace the Fan Resistor in a Citroen C3
How to Remove and Replace the Fan Resistor in a Citroen C3
Citroen C3 (2002-2009 / FC, FN) This short video shows you how to remove and replace the air conditioning fan resistor in a Citroen C3 (the procedure is similar for many other makes…
How to Replace the Cooling Fan Resistor in a Citroen C3
How to Replace the Cooling Fan Resistor in a Citroen C3
Citroen C3 (2002-2009 / FC, FN) To replace the cooling fan resistor on a Citroen C3, first disconnect the negative terminal of the battery, then locate the resistor module connected…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos