Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Clutch Slave Cylinder on a Citroen C3

Model: Citroen C3 FC, FN - Years 2002-2009
Part: Clutch

Is the clutch on your Citroen C3 not working properly? Let's see how to remove the clutch slave cylinder. Open and lift the bonnet, remove the securing pins of the clutch slave cylinder (as shown in the video); if you have issues, lift the car with a jack and proceed to remove the piece from underneath (disconnect the oil pipe). Once the piece is removed from its housing, clean all the pipes. Install the new slave cylinder in the engine bay. Reach the housing and screw in the pins (connect the oil pipe). Test the operation of the piece (top up with specific oil).

Updated on 15 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Lock Cylinder of the Citroen C3
How to Remove the Lock Cylinder of the Citroen C3
Citroen C3 (2002-2009 / FC, FN) Briefly, we will see the instructions that will allow you to remove and replace the lock cylinder of the Citroen C3. First, open the front door and s…
How to Replace the Clutch on a Citroën C3 1.4 HDi?
How to Replace the Clutch on a Citroën C3 1.4 HDi?
Citroen C3 (2002-2009 / FC, FN) To replace the clutch on a Citroën C3 1.4 HDi, lift the car so that you can remove the front right wheel and access the clutch housing. This housing …
How to Install the Clutch Disc on a Citroen C3
How to Install the Clutch Disc on a Citroen C3
Citroen C3 (2002-2009 / FC, FN) In this detailed video, learn how to install the clutch disc on a Citroen C3. Gather a socket wrench with the appropriate sockets or a screwdriver wi…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos