Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Air Filter on Citroen C3

Model: Citroen C3 FC, FN - Years 2002-2009
Part: Cabin air filter

Is it time to change the cabin air filter? Here’s how to do it on a C3 vehicle. Open the front bonnet and secure it. Unscrew the screws on top of the filter cover (where the air filter is located) using a screwdriver. Remove the cap from the filter housing with a screwdriver, then pull out the worn cabin filter (reach in to grab the filter). Insert a new cabin filter, ensuring it fits snugly around the walls of the housing. Finally, reattach the plastic cap of the filter housing and tighten the screws. Lower and close the front bonnet.

Updated on 16 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Pollen Filter on Citroen C3
Replacing the Pollen Filter on Citroen C3
Citroen C3 (2002-2009 / FC, FN) How to remove the cabin air filter on the Citroen C3? Here’s how to do it. Open the engine bay (lift the front bonnet), unscrew the screws with a scr…
How to Replace the Pollen Filter on the Citroen C3?
How to Replace the Pollen Filter on the Citroen C3?
Citroen C3 (2003-2010 / Pluriel) The pollen filter on the Citroen C3 differs from those in other cars for two reasons. Firstly, it is located in the engine bay rather than the cabin,…
Replace the Cabin Air Filter on a Citroen C3
Citroen C3 (2002-2009 / FC, FN) Let's replace the worn pollen filter on a Citroen C3 and see how to do it. The cabin filter is located in the engine compartment under the windscreen…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos