Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Front Brake Pads on Citroen Jumper

Model: Citroen Jumper MK 1 - Years 1994-2006
Part: Brake pads

Replace the front disc brake pads on a Citroen Jumper. See how to remove them from the disc brake. Position the vehicle on a column lift and raise it to a comfortable height for working. Unscrew the wheel bolts with a telescopic spanner. Start unscrewing the bolts of the brake caliper; detach it from the bracket. Use a screwdriver to detach the brake pads. Fit the new brake pads with all the associated bolts, tighten the caliper bracket to the disc, then refit the brake caliper and secure it with the screws. Refit the wheel. Replace the other front brake pads on the Citroen Jumper.

Updated on 18 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Glow Plugs on a Citroen Jumper
How to Replace the Glow Plugs on a Citroen Jumper
Citroen Jumper (1994-2006 / MK 1) This short video tutorial shows the process of removing and replacing the glow plugs on a Citroen Jumper. This task is easy to perform and requires v…
Where is the OBD2 port located on the Citroen Jumper?
Where is the OBD2 port located on the Citroen Jumper?
Citroen Jumper (2006-2014 / MK 2) If you are curious to find out where the OBD2 port is located in your Citroen Jumper, all you need to do is carefully read the steps described in the…
How to Install the Armrest on the Citroen Jumper
How to Install the Armrest on the Citroen Jumper
Citroen Jumper (2006-2014 / MK 2) In this brief guide, you will find instructions to install the armrest on the driver's seat of the Citroen Jumper. First, get inside the cabin and be…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos