Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Brake Light of a Citroen C3 Picasso

Model: Citroen C3 Picasso MK 1 - Years 2008-2017
Part: Tail light

In this video tutorial, you will learn how to remove the rear brake light of a Citroen C3 Picasso. You will need a hex key to complete the operation. First, open the boot and unscrew the screws next to the light support using the hex key. At this point, simply pull out the light gently to remove it. To disconnect it completely, unplug the electrical connector, and if desired, check the condition of the bulbs and replace them if necessary!

Updated on 19 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Third Brake Light Bulbs on a Citroen C3 Picasso
How to Change the Third Brake Light Bulbs on a Citroen C3 Picasso
Citroen C3 Picasso (2008-2017 / MK 1) In this video tutorial, you will see the steps to remove the third brake light and replace the bulbs on the Citroen C3 Picasso. First, open the rear …
Disassembly and replacement of the rear light of the Citroen C3 Picasso
Disassembly and replacement of the rear light of the Citroen C3 Picasso
Citroen C3 Picasso (2008-2017 / MK 1) Today we will discover the procedure for disassembling and replacing the rear light and its bulbs of the Citroen C3 Picasso. First, let's open the re…
Replacing the Brake Light Bulb on Citroen C3 Picasso
Replacing the Brake Light Bulb on Citroen C3 Picasso
Citroen C3 Picasso (2008-2017 / MK 1) If you need to replace the brake light bulb on your Citroen C3 Picasso because it has blown, you are in the right video. In a few steps, you will lea…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos