Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Brake Pads on a Citroen C4 Picasso

Model: Citroen C4 Picasso MK 1 - Years 2006-2013
Part: Brake pads

Replacing the rear brake pads on a Citroen C4 Picasso? Here’s how to do it. Lift the car on a column lift to the desired height, then remove the wheel (using a socket wrench or air drill) along with the respective bolts. Unscrew the locking bolt of the brake caliper and detach it from the disc. Use a screwdriver to remove the pads from the wheel hub caliper, then fit the new pads onto the brake caliper. Reattach the brake caliper over the brake disc, tighten all the bolts, and refit the wheel. Replace the pads on the other parallel brake disc.

Updated on 20 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Rear Brake Pads on the Citroen C4 Picasso
How to Change the Rear Brake Pads on the Citroen C4 Picasso
Citroen C4 Picasso (2006-2013 / MK 1) In this video, we will see how to change the rear brake pads on the Citroen C4 Picasso. First, open the brake fluid reservoir located in the engine c…
Replacing the Rear Brake Pads on Citroen C4 Picasso
Replacing the Rear Brake Pads on Citroen C4 Picasso
Citroen C4 Picasso (2013-2022 / MK 2) After removing the affected rear wheel by unscrewing the bolts and lifting the vehicle, use a medium-large flathead screwdriver to push back the brak…
How to Replace the Rear Brake Pads on the Citroen C4 Picasso
How to Replace the Rear Brake Pads on the Citroen C4 Picasso
Citroen C4 Picasso (2006-2013 / MK 1) First, position the car on a lift, raise it to a comfortable height to work on, and proceed to remove the wheel corresponding to the brake pads to be…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos