Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. C4 Picasso
    4. : Replacement cabin air filter / air conditioning Citroen C4 Picasso

Citroen C4 Picasso - Video tutorial

Model: Citroen C4 Picasso MK 2 - Years 2013-2022
Part: Cabin air filter
Operation: Replacement cabin air filter / air conditioning Citroen C4 Picasso

In this video we will see how to replace the internal air conditioning filter of a Citroen C4 Picasso. The filter is located on the passenger side: so first we are going to disassemble the plastic panel in the lower part and remove the torx screws in order to remove the side plastic panels, as shown in the video. At this point we can remove the whole piece and we will have access to the filter: to remove it, just pull it towards you. We assemble the new filter inserting it in the correct direction and finally we reassemble all the previously disassembled components, then follow the video to the end!


Posted on 17 December 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • C4 Picasso 2013-2022 - Where is the cabin filter of the Citroen C4 Picasso? Read Answer
    • C4 Picasso 2013-2022 - Where is the Citroen C4 Grand Picasso pollen filter located? Read Answer
    • C4 Picasso 2006-2013 - Where is the cabin air filter of the 2007 Citroen C4 Picasso? Read Answer

Replace the steering angle sensor on the Volkswagen Golf 5

When the steering angle sensor malfunction warning light comes on, it may need to be replaced as follows: first remove the steering wheel and the lower steering wheel guard by removing the three fixing screws. The steering sensor is located just below the steering column. To release it you need to have a small screwdriver and insert it into the hole on the front, push the screwdriver all the way down until the clips at the bottom are released. Next, pull down on the back of the card containing the sensor and disengage it from the steering column. At that point take the new card and reposition it, after which proceed backwards to reassemble the various components.

Watch the video!


by ScegliAuto

More videos