Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Headlight from a Citroen C3

Model: Citroen C3 FC, FN - Years 2002-2009
Part: Headlight

In this video tutorial, we will see how to remove the front headlight from a Citroen C3. First, lift the bonnet and remove the screws located near the headlight and the bumper, as shown in the video. Next, gently detach the bumper from the side to unclip it: also gently unclip the trim to release the headlight. Then, using a 10 mm socket, remove the lower screw of the headlight: pull it forward and disconnect the electrical connector if you want to remove it, or change the bulbs if needed.

Updated on 22 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlamp Bulbs on a Citroen C3
Citroen C3 (2009-2016 / SC) How do you replace the front headlamp bulbs on a Citroen C3? Follow these steps: open the bonnet by pulling the lever located at the bottom right of …
How to Replace the Headlight Bulbs of a Citroen C3
How to Replace the Headlight Bulbs of a Citroen C3
Citroen C3 (2002-2009 / FC, FN) Learn how to replace the headlight bulbs of a Citroen C3. Open the bonnet by pulling the lever located at the bottom right of the dashboard and secur…
How to Change the Front Headlight Bulbs on a Citroen C3
How to Change the Front Headlight Bulbs on a Citroen C3
Citroen C3 (2009-2016 / SC) To change the front headlight bulbs on a Citroen C3, open the bonnet by pulling the lever located at the bottom right of the dashboard and secure it …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos