Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. C3
    4. : How to change Citroen C3 headlight bulbs

Citroen C3 - Video tutorial

Model: Citroen C3 FN, FC - Years 2002-2009
Part: Headlight bulb
Operation: How to change Citroen C3 headlight bulbs

Let's see the disassembly of the bulbs of a Citroen C3. We open the bonnet by pulling the lever located at the bottom right of the dashboard, let's put it in safety. With a screwdriver unscrew the fastening pins of the lighthouse, extract the lighthouse from its seat and remove the lighthouse inspection cap (located in the rear part of the lighthouse). We take out the lamp holders from the headlight and we go to extract the damaged bulb with the help of a screwdriver. We assemble the new bulbs and (always suitable type and size) we insert the lamp holder in the lighthouse housing. We assemble the lighthouse with attached pins and inspection cap. We test the correct functioning of the lights.


Posted on 11 November 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos