Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Central Dashboard Display on Citroen Berlingo

Model: Citroen Berlingo MK 2 - Years 2008-2018
Part: Instrument cluster

Using one or two plastic levers (not metal, as they will scratch), pry under the front junction of the display, inserting the levers into the line where the display meets the dashboard: this will be enough to pull the display out of its housing. Once done, disconnect the connector by lifting the black lever and pulling it out. Again, using the plastic wedge, pry on the clips located under the screen and remove it from the casing. At this point, you will see the alphanumeric code related to the display and can purchase an identical one. For reassembly, simply proceed in reverse.

Updated on 4 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Set the Time and Date on the Citroen Berlingo
How to Set the Time and Date on the Citroen Berlingo
Citroen Berlingo (1996-2013 / MK 1) Discover in this video the instructions to adjust the date and time on the Citroen Berlingo. First, get inside the vehicle and turn the ignition key …
How to Install the Armrest on the Citroen Berlingo
How to Install the Armrest on the Citroen Berlingo
Citroen Berlingo (1996-2013 / MK 1) Below are the instructions to install the central armrest on the Citroen Berlingo. First, obtain the kit suitable for your vehicle, then get inside t…
Removing Dashboard Display on Citroen Berlingo
Removing Dashboard Display on Citroen Berlingo
Citroen Berlingo (1996-2013 / MK 1) In this video tutorial, you will learn how to remove the dashboard display on a first-generation Citroen Berlingo, as well as on a Peugeot Partner. F…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos