Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Radiator Replacement on Citroen C3

Model: Citroen C3 FC, FN - Years 2002-2009
Part: Radiator

Lift the car to work on the underside of the radiator. Remove the clip securing the hose to the exchanger and disconnect it to allow the coolant to drain (as there are no taps or valves for this purpose). Once the liquid is collected in a suitable container, move to the top of the bonnet to extract the radiator: the "only" issue is creating enough space to remove it, as the radiator is not small. Therefore, disconnect any ducts and connectors that obstruct access, unscrew the fan compartment first, and then disconnect the radiator to remove it.

Updated on 5 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the radiator fan of the Citroen C3
How to replace the radiator fan of the Citroen C3
Citroen C3 (2002-2009 / FC, FN) Replacing the radiator fan on a 2005 Citroen C3 car is a fairly simple operation to perform independently. To carry out the replacement of the fan, w…
How to replace the cooling radiator of the Citroen C3
How to replace the cooling radiator of the Citroen C3
Citroen C3 (2002-2009 / FC, FN) This brief guide will show us how to disassemble and replace the cooling radiator of the Citroen C3, in simple steps. First, we open the hood of the …
How to Replace the Coolant in a Citroen C3 Radiator Reservoir
How to Replace the Coolant in a Citroen C3 Radiator Reservoir
Citroen C3 (2002-2009 / FC, FN) How to replace the coolant in the radiator reservoir. Using a socket wrench, disconnect the radiator hose at the bottom and let the rusty fluid drain…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos