Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Coolant in a Citroen C3 Radiator Reservoir

Model: Citroen C3 FC, FN - Years 2002-2009
Part: Checks and maintenance

How to replace the coolant in the radiator reservoir. Using a socket wrench, disconnect the radiator hose at the bottom and let the rusty fluid drain into a container. Flush the cooling system with appropriate fluid, performing this process until the pipes and radiator are completely clean. Reconnect the previously removed hoses, tightening the metal clip bolts in the engine bay. Prepare to refill the radiator reservoir with new coolant. Start the vehicle and test its operation.

Updated on 18 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Bleed and Replace the Radiator Fluid on a Citroen C3
How to Bleed and Replace the Radiator Fluid on a Citroen C3
Citroen C3 (2002-2009 / FC, FN) In this video tutorial, you will learn how to bleed and replace the coolant in the radiator of a first-generation Citroen C3, as well as other models…
Radiator Coolant Replacement
Radiator Coolant Replacement
Citroen C3 (2002-2009 / FC, FN) Before proceeding, open the radiator cap. Remove the plastic cap located underneath the radiator using the appropriate tool, then siphon the fluid us…
How to Replace the Radiator Fluid in a Citroen C3
How to Replace the Radiator Fluid in a Citroen C3
Citroen C3 (2009-2016 / SC) Open and lift the bonnet. Now go underneath the car and observe the hoses connected to the radiator. You will notice the wider hose that will allow y…

Other guides you may be interested in

    Frequently Asked Questions

    • C3 2002-2009 - Where is the horn located in the Citroen C3? Read answer
    • C3 2009-2016 - What to do in case of malfunction of the external temperature sensor in the Citroen C3? Read answer
    • C3 2002-2009 - Where is the power steering tank located in the Citroen C3? Read answer
    • C3 2009-2016 - How many reversing lights does the Citroen C3 have? Read answer

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos