Do it yourself
Frequently asked questions about cars and motorcycles

How to Bleed and Replace the Radiator Fluid on a Citroen C3

Model: Citroen C3 FC, FN - Years 2002-2009
Part: Antifreeze coolant

In this video tutorial, you will learn how to bleed and replace the coolant in the radiator of a first-generation Citroen C3, as well as other models from the PSA group. First, lift the vehicle and remove the hose connected to the radiator at the bottom; once disconnected, let all the radiator fluid drain into a container. Next, open the bonnet of your car and remove the cap from the coolant reservoir; fill with new fluid up to the maximum level indicated by a mark on the reservoir.

Updated on 7 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Citroen C3 (2009-2016 / SC) Open and lift the bonnet. Now go underneath the car and observe the hoses connected to the radiator. You will notice the wider hose that will allow y…
Citroen C3 (2002-2009 / FC, FN) How to replace the coolant in the radiator reservoir. Using a socket wrench, disconnect the radiator hose at the bottom and let the rusty fluid drain…
Citroen C3 (2002-2009 / FC, FN) Before proceeding, open the radiator cap. Remove the plastic cap located underneath the radiator using the appropriate tool, then siphon the fluid us…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos