Do it yourself
Frequently asked questions about cars and motorcycles

Radiator Coolant Replacement

Model: Citroen C3 FC, FN - Years 2002-2009
Part: Antifreeze coolant

Before proceeding, open the radiator cap. Remove the plastic cap located underneath the radiator using the appropriate tool, then siphon the fluid using the designated device. Allow all the fluid to drain completely. Refit the lower cap and fill the radiator with new coolant to the level indicated on the expansion tank. Start the engine and let it run until the thermostat valve opens. When the engine is cold, top up the fluid if necessary. Antifreeze is a chemical product and must not be disposed of in the environment; take it to the appropriate collection and disposal centres.

Updated on 7 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Citroen C3 (2002-2009 / FC, FN) How to replace the coolant in the radiator reservoir. Using a socket wrench, disconnect the radiator hose at the bottom and let the rusty fluid drain…
Citroen C3 (2002-2009 / FC, FN) Want to replace the coolant on the C3? Open the front bonnet and see how to do it. Disconnect the radiator hose at the bottom using a socket, allowin…
Citroen C3 (2002-2009 / FC, FN) This brief guide will show us how to disassemble and replace the cooling radiator of the Citroen C3, in simple steps. First, we open the hood of the …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos