Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Gear Knob and Gaiter on a Citroen C2

Model: Citroen C2 MK 1 - Years 2003-2010
Part: Shifter boot

In this short video, we will see the instructions for removing and replacing the gaiter and gear knob on a Citroen C2 in simple steps. First, get into the vehicle and remove the plastic cover at the base of the gear lever by prising it off at the sides; then disconnect the various electrical connectors found underneath, as shown in the video. At this point, slide off and remove the gear gaiter, detaching it from the plastic cover; then cut the tie wrap that is placed between it and the gear knob. Reassemble everything by applying the reverse procedure!

Updated on 13 April 2026 by ScegliAuto

Video tutorial

Related tutorials

What is the Fuse Diagram for the Citroen C2?
What is the Fuse Diagram for the Citroen C2?
Citroen C2 (2003-2010 / MK 1) If one or more devices in your Citroen C2 suddenly stop working, first check the status of the respective fuses, the diagrams of which are indicated …
How to Replace the Battery in a Citroen C2
How to Replace the Battery in a Citroen C2
Citroen C2 (2003-2010 / MK 1) To replace the battery in your Citroen C2 (2003-2010), carefully follow the instructions in this mini guide. First, ensure the car is completely off …
How to Change the Engine Oil and Oil Filter on the Citroen C2
How to Change the Engine Oil and Oil Filter on the Citroen C2
Citroen C2 (2003-2010 / MK 1) In this video, you will see the steps to replace the engine oil and oil filter, performing the routine maintenance service on the Citroen C2. First, …

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos