Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Brake Light Bulb of a Citroen C4 Rear Headlamp

Model: Citroen C4 MK 1 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Tail light bulb

See other generations:
Video tutorial

Before you begin, open the boot of your Citroen C4. Start by unclipping and moving the internal side cover of the boot. Next, unscrew and remove the screws that secure the rear headlamp to the frame, then extract the lamp and disconnect the electrical connector.

This will give you access to the bulb holder. Proceed by unclipping the clips that secure the bulb holder to the rear lamp.

At this point, unclip and remove the blown bulb, and the disassembly will be complete. To fit the new bulb and reassemble everything, simply follow these steps in reverse, and you will have completed the replacement.


Updated on 16 April 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Headlamp Bulb on a Citroen C4
How to Replace the Rear Headlamp Bulb on a Citroen C4
Citroen C4 (2010-2018 / MK 2) If you own a Citroen C4 Mk2 and want to learn how to correctly and quickly replace the rear headlamp bulb, read this guide carefully and follow the s…
How to Replace the Front Headlamp Bulb on a Citroën C4
How to Replace the Front Headlamp Bulb on a Citroën C4
Citroen C4 (2010-2018 / MK 2) To replace the front headlamp bulb on a Citroën C4, open the bonnet to access the internal part of the corresponding headlamp. Disconnect the circula…
How to Replace the Front Headlamp Bulb on a Citroën C4
How to Replace the Front Headlamp Bulb on a Citroën C4
Citroen C4 (2004-2010 / MK 1) To replace the front headlamp bulb on a Citroën C4, open the bonnet to access the rear of the headlamp corresponding to the bulb that needs replacing…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos