Do it yourself
Frequently asked questions about cars and motorcycles

How to remove the headlight of a Citroen C4 Picasso

Model: Citroen C4 Picasso MK 1 - Years 2006-2013
Part: Headlight

Before we can start disassembling the front light of the Citroen C4 Picasso, we will first have to open the hood. Once the hood has been opened, near the two headlight supports, we will notice two screws for support, which we are going to unscrew. As soon as we have unscrewed all four screws, the headlight will be supported only by the two side hooks and the lower hook. Let's start by unhooking the outermost hook, pulling the headlight to the right. By doing so we will have disconnected the first hook. To disconnect the lower hook we will simply have to pull upwards. In the meantime we will have to rotate the lighthouse a little counter-clockwise, allowing us to disconnect the last hook on the right side of the lighthouse. At this point there is nothing left to do but disconnect the pin that connects the headlight to the car, and we will have finished the disassembly.


Posted on 17 February 2024 by ScegliAuto



How do you replace the rear headlight bulb of the Citroën C4 Picasso?
Citroen C4 Picasso (2006-2013 / MK 1) The replacement of the rear headlight bulb of the Citroën C4 Picasso is done by opening the rear hatch of the car, so that it is possible to locate t
How do you remove the headlight from the Citroën C4 Picasso?
Citroen C4 Picasso (2006-2013 / MK 1) Replacing the headlight on the Citroën C4 Picasso is done by opening the hood, so that you can access the two screws that fix the headlight from the
How do you replace the front headlight bulb of the Citroën C4 Picasso?
Citroen C4 Picasso (2006-2013 / MK 1) The procedure for replacing the headlight bulb of the Citroën C4 Picasso is done by opening the hood, so that it is possible to access the interior o

Other guides that may interest you

How to deactivate the safe lock on a Volkswagen Golf.

The safe lock is indeed an anti-theft system that prevents thieves from accessing the car. This device locks the doors, both externally and internally, when the driver activates the central locking remote control after leaving the vehicle. To permanently disable it, it is necessary to use a diagnostic program such as VCDS that we will connect to the vehicle through the ODBII port. Then wait for the connection and recognition of the control unit and then select the blocks present and locate the safe lock to disable it. And the job will be completed.

Watch the video!


by ScegliAuto

More videos