Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Front Headlight of a Citroen C4 Picasso?

Model: Citroen C4 Picasso MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Headlight

See other generations:
Video tutorial

To start removing the front headlight of the Citroen C4 Picasso, you must first open the bonnet. Once the bonnet is open, near the two headlight supports, you will notice two screws per support, which you will unscrew.

When all four screws are removed, the headlight will be supported only by the two side clips and the lower clip. Start by unhooking the outermost clip on the left by pulling the headlight to the right.

This will disconnect the first clip. To disconnect the lower clip, pull upwards.

While pulling upwards, slightly rotate the headlight anti-clockwise, allowing you to disconnect the last clip on the right side of the headlight. At this point, pull the connector that links the headlight to the car, disconnecting it. Once you have also disconnected the headlight connector, you will have successfully completed the removal of the front headlight of the Citroen C4 Picasso.


Updated on 19 April 2026 by ScegliAuto


Related tutorials

Citroen C4 Picasso (2013-2022 / MK 2) These brief steps will show you how to remove and replace the front fog light bulb on a Citroen C4 Picasso and C4 Grand Picasso. First, move to the f…
Citroen C4 Picasso (2006-2013 / MK 1) Below we will see the instructions that will allow us to disassemble and replace the front headlight of the Citroen C4 Grand Picasso. First, we open …
Citroen C4 Picasso (2006-2013 / MK 1) To remove the front headlight on a Citroën C4 Picasso, open the bonnet to access the screws securing the headlight from above. Once these screws are …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos