Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter on a Citroën C5?

Model: Citroen C5 MK 2, RD, X7 - Years 2008-2017
Part: Cabin air filter

To replace the cabin filter on a Citroën C5, unscrew the screw located next to the pedals on the right side to remove the panel secured by the screw. Next, turn the knobs that secure the part of the panel between the steering column and the pedals: by rotating these knobs, you can also remove this part of the panel and gain access to the internal components. The cabin filter will be located at the back, on the right side, as shown in the video. Once located, it can be replaced, and you can reassemble all the panels removed earlier.

Updated on 20 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Cabin Air Filter on a Citroen C5
How to Remove the Cabin Air Filter on a Citroen C5
Citroen C5 (2000-2008 / DC, MK 1) Let's replace the worn pollen filter on a Citroen C5 and see how to remove it. The cabin filter is located at the bottom behind the centre tunnel. Us…
How to Replace the Cabin Filter on the Citroën C5?
How to Replace the Cabin Filter on the Citroën C5?
Citroen C5 (2008-2017 / MK 2, RD, X7) To replace the cabin filter on the Citroën C5, loosen the panel located on the side of the driver's footwell, corresponding to the central panel. Onc…
How to Change the Cabin Filter on a Citroen C5
How to Change the Cabin Filter on a Citroen C5
Citroen C5 (2000-2008 / DC, MK 1) How to change the cabin filter on a Citroen C5? Follow these steps. Use a plastic lever to detach the trim located at the bottom of the centre consol…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos